Usage:
This product can be used in field of Petroleum, Chemical, Laboratory, Medical Treatment etc., and flushing the chemistry liquid sputtered eye and face rapidly, so reduce the level of injury to the minimum.
Main Performance:
Material: High density polyester, pro-environment and safety.
Capacity: The maximum reserve is 60L(16 gallon), workable is 40L availably, ensure flushing for 15 minute.
Water injection hole: wide water injection hole and apt to inject water, have dust cover.
Color: pro-environment green, aesthetic and striking.
Water flow: Due to change diameter on the water hole, so more bonhomie and enrich , water yield is not lower than 1.5L/minute.
Installation:
Located near happen accident place, see easily and usage conveniently. Can install wall or bracket, or can use with go-cart, mounting height is installation schematic diagram; when open the eye wash arm, the sprayer should be 83.8cm~114.3cm above ground.
Using:
Maintenance:
Attention:
Trouble shooting:
Number |
Problem |
Reason |
Exclude measures |
1 |
1.No flow. |
a.not water |
1. a. Tank empty.Refill tank. |
2 |
2.Poor flow from eyewash head(s). |
a.water few |
2. a. Tighten head assembly. |
3 |
3.Water leak between joints or fittings. |
rubber tube aging |
a. Pull hose off fitting. Smooth raised plastic edge on center of fittings. Return hose and hose clamp to original position.
b. Tighten hose clamp(s) with pliers. |